PU Flexible-Hard Flooring Services

PU Flexible-Hard Flooring Services
PU Flexible-Hard Flooring Services
Price And Quantity
  • Square Meter/Square Meters
  • 100
  • Square Meter/Square Meters
  • 2000.00 - 7500.00 INR
    Product Description

    PU Flexible-Hard Flooring Services are among the most popular forms of resinous industrial flooring services used in logistics, factories, industries, hotels, hospitals, etc. Using flexible polyurethane material as a floor overlay in residential or commercial applications can greatly increase the longevity, boost flooring appearance, provide additional comfort and support, and minimize ambient noise. Polyurethanes are also used to cover floors, including wood, parquet, stone, etc. This defensive finish is abrasion and solvent resistant while being simple to clean and maintain.


    SL is a two part solvent based coloured self smoothing polyurethane resin with tough elastic properties. Uses Areas Smooth wearing course with crack bridging properties for industrial floors in production and storage facilities, work shops etc.  Broadcast wearing course with crack bridging properties for wet working areas (food and beverage industry etc.) car park decks and loading ramps etc. Seal coat for broadcast systems Can be subjected to medium heavy mechanical and chemical stress.

    Characteristics Advantages

    Flexible and tough elastic Crack bridging Good chemical and mechanical resistance resistant surface possible Liquid proof Easy to apply Easy to clean Economical  

    Product Data

    Form Appearance Resin part a: colored, liquid Hardener part B clear, liquid Filler Part  C Colors: Available in range of colors.  

    Application Instructions Mixing:

    Mix Part A & B by weight as mention on packing Mixing time Prior to mixing, stir part A mechanically. When all of part B has been added to part A mix continuously for 2 minutes until a uniform mix has been achieved. When parts A and B have been mixed, added the C Component (10 kgs of C component is recommended for 18 kgs of set) mix for a further 2 minutes until a uniform mix has been achieved. 

    Mixing Tools

    MIPROTHANE SL must be thoroughly mixed using a low speed electric stirrer (300-400rpm) or other suitable equipment.

    Application Method  Tools

    MIPROTHANE SL is applied by roller, serrated trowel poured up to desired thickness. Depending on application type period if necessary roll immediately in two directions with spiked roller to ensure even thickness and to remove entrapped air. Consumption: Changeable depending on the application type, surface profile, variations in level or wastage etc.


    • 2K SL Part A: 25 kg containers Part B: 5 kg containers 3K SL Part A: 5 kg containers Part B: 2 kg containers Part C 14 kgs Bag
    • Storage Conditions / Shelf-Life 12 months from date of production if stored properly in original, undamaged sealed packaging, in dry conditions at temperatures between +50 C and +300 C 
    • Substrate Temperature + 100 C min. / + 300 C max.
    • Pot life: 30min
    • Hard Curing Time (walk able on) : Min 24 hours.
    • Full Curing Time: 7 days
    • Density: Mixed Resin (unfilled): 1.3 kg/l Mixed Resin (Filled 1:0.7) 1.8kg/l All Density values at + 230 C  
    Substrate Temperature:
    • 100C min. / 30 max.
    • Pot life: 30min
    • Hard Curing Time (walk able on) : Min hours.
    • Full Curing Time: 7 days
    • Mixed Resin (unfilled): 1.3 kg/l
    • Mixed Resin (Filled 1:0.7) 1.8kg/l
    • All Density values at 230C


    Substrate Quality Concrete substrates must be sound and of sufficient compressive strength (minimum 25 N/mm2 ) with a minimum pull off strength of 1.5 N/mm2 . the substrate must be clean, dry and free of all contaminants such as dirt, oil, grease, coatings and surface treatments, etc. if in doubt apply a test area first.

    Substrate Preparation

    Concrete substrates must be prepared mechanically using abrasive blast cleaning or scarifying equipment to remove cement laitance and achieve an open textured surface. Weak concrete must be removed and surface defects such as voids must be fully exposed. Repairs to the substrate, filling of blovoids and surface leveling must be carried out by using MIPRO-E epoxy repair mortar the concrete or screed substrate has to be primed leveled in order to achieve an even surface. High spots must be removed by e.g. grinding. All dust; loose and friable material must be completely removed from all surfaces before application of the product preferably by brush and /or vacuum.  

    Application Conditions:

    Min. +100 C min. Max. +300 C max. Substrate Moisture Content < 4% phw moisture content. R.H. 70% max. Dew Point Beware of condensation The substrate and uncured floor must be at least 30 C above the dew point to reduce the risk of condensation or blooming on the floor finish 

    Trade Information
    • 100-1000000 Per Day
    • 1-7 Days
      Related Products
      Acid Proof Brick Lining Services

      Send Inquiry
      MMA Flooring Services

      Send Inquiry
      Acid Proof Brick Tank-Tower Lining Services

      Send Inquiry
      PU Flooring Urethane Concrete Services

      Send Inquiry
      Acid Proof Tile Lining Services

      Send Inquiry
      Glass Flake Coating and Lining Services

      Send Inquiry
      right arrow
      left arrow
      Contact Us

      Plot No. 2114, Phase-III, G.I.D.C., Vatva, Ahmedabad, Gujarat, 382445, India
      Phone :+918037261488