0
<-- nev left start -->

Mipro-Pr Anti-Corrosive Bitumen Primer

Mipro-Pr Anti-Corrosive Bitumen Primer
Mipro-Pr Anti-Corrosive Bitumen Primer
Price And Quantity
  • Kilograms/Kilograms
  • 100
  • Kilograms/Kilograms
  • 15.00 INR
    Product Description

    We are engaged in rendering a wide array of Mipro-Pr Anti-Corrosive Bitumen Primer. It is suitable for primer to give a complete protection against atmospheric corrosion and chemical corrosion. This primer is also shield against corrosive attack. It is easy to apply on as an anti-corrosive primer which gives a smooth finishing coatings. Mipro-Pr Anti-Corrosive Bitumen Primer is mostly used in road construction, paint industries and others. It is waterproof and odourless.

    INTRODUCTION:

    All type of surface whether, it is concrete, steel or wood, and require protection against corrosive environment. To protect sub-striate against corrosive attack, it is recommended to apply anti-corrosive primer followed by further finish coats, screed lining or brick/tile lining. MIPROPR is most suitable primer to protect different type of sub-striate against atmospheric corrosion and chemical corrosion 

    AREA OF APPLICATION: MIPRO-PR can be applied on variety of sub-striate like steel, concrete, wood. To protect steel structure, tanks, pipes, girders, marine structure either exteriors or interiors. MIPRO-PR is very widely used on concrete as a primer where further acid resisting brick/tile lining is recommended. 

     

    Physical Properties

    Viscosity @ 25 C by Ford cup B4 in Sec.

    90-120

    Drying time @ 25 C.

    1 hr.

    Bonding to steel/concrete/ceramic/MS

    Good

    Shelf Life (in sealed container only)

    1 yr.

    METHOD OF APPLICATION: Concrete should be sound, properly cured for min. 28 days, damp free, even in line, free from any loose cement mortar and any loose particles, before application of MIPRO-PR primer and any type of further acid resisting brick/tile lining installation 

     

    • The material in the container should be properly mixed before application 
    • MIPRO-PR can be applied with good quality of painting brush in a uniform thickness. Consumption of material will depends on surface condition and absorption of the concrete. Two coats recommended for best performance. Allow 2-3 hours. Drying time between each coat.
    • On MS surface, sand blasting is recommended for good bonding with substriate, follow by two coats of MIPRO-PR anti-corrosive primer 

    STORAGE: MIPRO-PR should be stored in properly sealed containers away from direct sun light, heat and flame. Reseal container after use. 

    PACKING: 25 Lts. 200 Lts. good quality MS container 

     

    HEALTH & SAFETY: It is advisable to wear protective wears at the time of use of MIPROPR and all other MIPRO brand products. In case of contact with eyes, clean with plenty of water and consult a doctor

    This information, given in good faith, is based on results gained from experience and tests. However, all recommendations or suggestions are made without guarantee since the conditions of use are beyond our control.  

    Trade Information
    • 100-1000000 Per Day
    • 1-7 Days
      Contact Us

      Plot No. 2114, Phase-III, G.I.D.C., Vatva, Ahmedabad, Gujarat, 382445, India
      Phone :+918037261488