- 15.00 INR
We are dealing a high quality of Mipro-MC Anti-Corrosive Bitumen Mstic. It is known for its resistant to temperature and spark proof. Apart from this, provided mastic is highly durable and available in varied customizations to fulfil the needs of consumers. This mastic is manufactured from superior grade constituents to make it in accurate compositions. Mipro-MC Anti-Corrosive Bitumen Mstic is advisable to wear protective wears at the time of using this mastic.
INTRODUCTION: Concrete and ordinary red brick masonry with cement plastered surface are basic methods for construction of floors, foundations, tanks, sumps manholes etc. These can be attacked by corrosive environment, spillages of acids and alkalis and other chemicals handled in modern chemical industries. To protect civil structure of plants and buildings from corrosive attack, acid resisting brick lining is most communally used method. MIPRO-MC is used as an inter-liner with acid resisting brick lining. It can also applied as open mastic flooring for heavy duty flooring.
AREA OF APPLICATION : MIPRO-MC is mainly used as an impermeable inter-liner with acid resisting brick/tile lining on floors, tanks, drains, sumps. It can also applied, as open mastic flooring where diluted chemicals are to be
Softening Point(B&R Method) C
Recommended Temp. Limit
CHEMICAL RESISTANCE: MIPRO-MC has good resistance to weak, diluted acids, alkalis salts etc. It is not recommended to use against strong acids, oxidizing acid solvents, oil and fats.
Surface preparation and application of MIPROPR: Refer application method of MIPRO-PR.
After doing necessary surface preparation and application of primer coating, area to be installed with MIPRO-MC should be divided in to equal no. bays. To maintain even thickness required, place wooden or aluminum batten. MIPRO-MC is then broken in small pieces and put it in heating pan. While heating, keep material moving to avoid burning. It is heated until it comes in a uniform consistency and then applied on the surface and works it with wooden float, to achieve uniform thickness and smooth surface free from any pinholes
STORAGE & PACKING Keep MIPRO-MC away from direct sunlight, heat solvents etc. Under this condition, its shelf life is unlimited. It is supplied in powder form and packing size is 40 kgs. bag.
HEALTH & SAFETY Handle melted MIPRO-MC compound very carefully . Avoid contact with skin. It is advisable to wear protective wears at the time of use of MIPRO-MC and all other MIPRO brand products
This information, given in good faith, is based on results gained from experience and tests. However, all recommendations or suggestions are made without guarantee since the conditions of use are beyond our control.
- 100-1000000 Per Day
- 1-7 Days
Plot No. 2114, Phase-III, G.I.D.C., Vatva, Ahmedabad, Gujarat, 382445, India