Mipro-Fa Acid-Alkali Resistant Furan Resin Base Mortar

Mipro-Fa Acid-Alkali Resistant Furan Resin Base Mortar
Mipro-Fa Acid-Alkali Resistant Furan Resin Base Mortar
Price And Quantity
  • Kilograms/Kilograms
  • 100
  • Kilograms/Kilograms
  • 15.00 INR
    Product Description

    INTRODUCTION: MIPRO-FA is a two-part chemical setting Furan base mortar used for bonding acid resistant bricks and tiles. It is impermeable in texture and resistant to a very wide range of chemicals, including strong acids alkalis, oils, solvents and unaffected by temperature upto 170 C. MIPRO-FA "C" a 100 % carbon filled mortar is available where resistant to Hydrofluoric acid, fluoride salts and strong hot alkalis are required.

    AREA OF APPLICATION: MIPRO-FA is used for acid resistant bricks and tiles lining where maximum chemical resistance is required e.g. dyestuff, rayon, steel, thermal power stations, fertilizers, petrochemicals, food-pharmaceuticals industries on locations like floors, drains, tanks, reaction & storage vessels, effluent treatment plants etc.


    Physical Properties




    Mix Ratio by wt. Sol to Powder


    Compressive Strength kg/cm2


    Flexural Strength kg/cm2


    Bond Strength kg/cm2


    Water Absorption kg/cm2

    1% by wt

    Max. Temp.

    170 C

    Setting Time

    18-24 Hours.

    METHOD OF APPLICATION: MIXING: MIPRO-FA is prepared by mixing solution & powder to form a workable mortar. The recommended ratio of mixing is 1 part solution to 3 parts powder by wt. The ratio will vary depending upon ambient temperature and working conditions. Use clean, dry mixing pan. Place appropriate quantity of solution in mix pan, and add powder slowly, mixing thoroughly until completely dispersed. Do not mix more material, then can be used within 20-30 minutes

    APPLICATION: Ensure that bricks or tiles are clean, dry and stored at ambient temperature. Butter the bricks or tiles with mixed mortar ensuring uniform coverage, with a slight more in the center so no air pockets are formed while its installation. When using as only jointing mortar, it is essential that MIPRO-FA is filled to the full depth of the joint. During and after completion of the application, the area must be kept dry and free from any other materials, which can affect setting and curing of MIPRO-FA.

    CHEMICAL RESISTANCE MIPRO-FA is recommended to use against very wide range of acids, alkalis, solvents, salts, oils and fats. However MIPRO-FA is not recommended to use against HF, fluoride salts, and strong hot alkalis. For these conditions, MIPRO-FA "C" 100 % carbon filled mortar is available. Also it is not recommended against strong oxidizing acids like chromic acid, Nitric acid and other oxidizing agents.

    STORAGE & SHELF LIFE Always keep solution & powder in cool dry place in sealed container and bag, away from direct sun light, moisture etc. If stored as above, shelf life of solution: 1 year powder: 3-4 months

    PACKING Solution: 25 kegs and 250 kgs sound quality MS drums. Powder: 50 kgs in LDPE+HDPE bags. 

    HEALTH & SAFETY It is advisable to wear protective wears at the time of use of MIPRO-FA and all other MIPRO brand products. In case of contact with eyes and skin, wash with plenty of water and consult a doctor. 

    This information, given above in good faith, is based on results gained from experience and tests. However, all recommendations or suggestions are made without guarantee since the conditions of use is beyond our control. 

    Trade Information
    • 100-1000000 Per Day
    • 1-7 Days
      Related Products
      Mipro-Eta Epoxy Coating

      Send Inquiry
      Miproglass 101-E Glass Flake Reinforced Coating

      Send Inquiry
      Mipro-Cem Sbr Chemicals

      Send Inquiry
      Mipro-Epr Epoxy Repair Mortar

      Send Inquiry
      Epoxy Grout - HP Epoxy

      Send Inquiry
      Mipro-K Acid Resistant Silicate Mortar

      Send Inquiry
      right arrow
      left arrow
      Contact Us

      Plot No. 2114, Phase-III, G.I.D.C., Vatva, Ahmedabad, Gujarat, 382445, India
      Phone :+918037261488