- 385.00 - 650.00 INR
MIPRO-E is a three-part chemically set epoxy resin base mortar. It adheres well to acid-resistant bricks, tiles, asphalt, and MS surfaces. Mipro-E S-L Screed Epoxy, on the other hand, is a hard-wearing floor screed with a host of distinct properties, including a high gloss, physically appealing, easy-to-clean, and hygenic screed with superior chemical resistance. They are usually wipe-clean, much more durable than other floor coatings, and can be customised by incorporating shapes or incorporating coloured flakes or aggregates into the mix.
MIPRO-E S/L SCREED is a three parts chemical setting epoxy resin base self-level flooring screed. It exhibits excellent adhesion to concrete, stone, surface.
AREA OF APPLICATION
This product finds application as concrete floor leveling, before doing pigmented self-level epoxy flooring. Can be applied to have high strength epoxy floor followed by application of epoxy or PU top coats.
Mix Ratio by wt. Binder to Powder
Compressive Strength kg/cm2
Flexural Strength kg/cm2
Bond Strength kg/cm2
Setting Time 25 deg C
METHOD OF APPLICATION
All mixing tools and pan must be clean, dry. Take appropriate quantity of resin and hardener and mix it truly with suitable means, until you get homogeneous mix. Then add powder slowly in it and start mixing slowly to avoid air trapping. The ratio can vary depending upon ambient temperature and working conditions.
After proper mixing, pour the material on properly prepared and epoxy primed surface, then work with notch trowel and spread the material evenly on the floor. Then work with spike roller to release any air bubbles and level the materials. Then allow it to dry & cure.
MIPRO-E S/L SCREED is resistant to mild acids, alkalis, salts, greases, detergents etc. However it is not recommended against strong mineral and oxidizing acids.
STORAGE & SHELF LIFE
Always keep resin, hardener and powder in cool, dry place, away from direct sunlight and moisture. If stored in sealed containers and bag shelf life of Resin, Harder & Powder will be one year.
As required by customer.
HEALTH & SAFETY
It is advisable to wear protective wears at the time of use of MIPRO-E S/L SCREED and all other MIPRO brand products. In case of contact with eyes and skin, wash with plenty of water and consult a doctor.
This information, given in good faith, is based on results gained from experience and tests. However, all recommendations or suggestions are made without guarantee since the conditions of use are beyond our control
- 100-1000000 Per Day
- 1-7 Days
Plot No. 2114, Phase-III, G.I.D.C., Vatva, Ahmedabad, Gujarat, 382445, India