Mipro-Cp Acid-Alkali Resistant Cashew Phenolic Resin Base Mortar

Mipro-Cp Acid-Alkali Resistant Cashew Phenolic Resin Base Mortar
Mipro-Cp Acid-Alkali Resistant Cashew Phenolic Resin Base Mortar
Price And Quantity
  • Kilograms/Kilograms
  • 100
  • Kilograms/Kilograms
  • 15.00 INR
    Product Description

    Owing to rich market experience, we are providing an exclusive array of Mipro-Cp Acid-Alkali Resistant Cashew Phenolic Resin Base Mortar. It is known for its impact and abrasion resistant in nature. This mortar is helpful for joints filling dependent upon chemical exposure. Mipro-Cp Acid-Alkali Resistant Cashew Phenolic Resin Base Mortar gives a smooth spreading epoxy mortar which is used to joined acid proof tiles. It is also useful in ETP plants to give an excellent coating.

    INTRODUCTION MIPRO-CP is a two -part chemical setting cashew-phenolic base mortar used for acid resisting brick lining, to protect most commonly used construction materials like RCC, MS, steel, brick masonry construction etc., from corrosive environment in modern chemical age. MIPRO-CP is resistant to acids, alkalis, and solvents, etc. at temperature upto 170 C

    For HF acid and Fluoride resistance, use Silica free version of this product.

    AREA OF APPLICATION MIPRO-CP is used for acid resistant brick/tile lining where maximum chemical resistance is required at most economical cost. MIPRO-CP is most inexpensive among other resin base mortar, but at the same time is most suitable material also.  

    Physical Properties



    Mix Ratio by wt. Sol to Powder


    Compressive Strength kg/cm2


    Flexural Strength kg/cm2


    Bond Strength kg/cm2


    Water Absorption


    Max. Temp.

    170 C

    Setting Time

    18-24 Hrs

    METHOD OF APPLICATION MIXING: MIPRO-CP is prepared by mixing of solution & powder to form a workable mortar. Mixing ratio is 1 part solution to 3 parts powder by wt. This ratio can vary depending upon ambient temperature and working conditions. Use clean, dry mixing pan. Take required quantity of solution and add powder slowly and start mixing to get uniform paste like mortar. Do not mix large quantity, and then can be used within 20-30 minutes.

    APPLICATION: Ensure bricks or tiles are clean, dry and kept at the same temperature of MIPROCP. Apply mixed mortar on brick/tile in Even thickness on all sides for bedding & jointing with the same materials. Apply little more in center so no air pockets are formed while its installation. For only joints filling, it is recommended to take great care that full depth is filled with the same. During & after completion of the application, the area must be kept dry and free from and other materials and traffic, which can affect setting & curing of MIPRO-CP.  

    CHEMICAL RESISTANCE MIPRO-CP will provide very good protection against most acids, alkali solvents, oil, fats, salts etc. However it is not recommended for protection against HF, fluoride salts etc. 

    STORAGE & SHELF LIFE: Always keep solution & powder in cool, dry place, away from direct sunlight and moisture. If stored in sealed container and bags, shelf life of solution will be 12 months, and shelf life of powder will be 4-5 months.

    PACKING Solution: 25 kgs and 200 kgs (NET) in good quality MS drums. Powder: 37.5 kgs (NET) in LDPE+HDPE bags.

    HEALTH & SAFETY it is advisable to wear protective wears at the time of use of MIPRO-CP and all other MIPRO brand products. In case of contact with skin and eyes, wash with plenty of water and consult a doctor.

     This information, given above in good faith, is based on results gained from experience and tests. However, all recommendations or suggestions are made without guarantee since the conditions of use are beyond our control. 

    Trade Information
    • 100-1000000 Per Day
    • 1-7 Days
      Related Products
      Mipro-Pol Acid-Alkali Resistant Polyester Resin Base Mortar

      Send Inquiry
      Mipro-S Acid Resistant Sulphur Base Mortar

      Send Inquiry
      Miproglass 101-E (HYB) Glass Flake Reinforced Coating

      Send Inquiry
      Mipro-E S-L Screed Epoxy

      Send Inquiry
      Mipro-E(Hyb) Acid-Alkali Resistant Hybrid Epoxy Resin Base Mortar

      Send Inquiry
      Mipro-Epr Epoxy Repair Mortar

      Send Inquiry
      right arrow
      left arrow
      Contact Us

      Plot No. 2114, Phase-III, G.I.D.C., Vatva, Ahmedabad, Gujarat, 382445, India
      Phone :+918037261488